Description

Wireless fire alarm manual call point is the key part of the wireless fire alarm system and widely used in our modern life. Without wires, you can install the wireless manual call point in an easily found place. When you need to sound an alarm, you can find wireless manual call point without the limit of a wired system. Multiple wireless manual call points can be linked to the same wireless fire alarm control panel, so you can run a complete fire alarm system wirelessly from one control panel.

Where should the call point be installed?

In general, call points should be installed 4.5 to 5 feet above the ground, close to the exits and entrances of the premises. It should also be noted that the travel distance from any point in the building to the nearest human call point should not exceed 15 meters. Additional call points should be installed in locations marked as high risk.

 

 

Character

  • Software and hardware multi-stage filtering improves the anti-interference anti-inhibition ability.
  • Self-checking function.
  • Faulty alarm, firm alarm, battery notification.
  • 433MHz wireless network.
  • Easy installation and maintaining.
  • Real time to monitor the alarm system for gateway.
  • Low power consumption and long service life.
  • Full seal protection technology.

Technical Specification

Voltage 

DC 3V

Current  

Monitor<30uA, Alarm<6mA

Communication

433MHz Wireless

Transmit Power

<20dBm

Connect distance 

<200m

Indicator Normal:

Every 75s green light flash

                                 Alarm: Keep red light

                                 Faulty: Every 45s yellow light flash

Operating Environment 

-10℃~+55℃,Less than 95%(non-condensing)

Material/Colour

ABS/Red

Dimensions 

87mm×85mm×30mm

Weight 

113g
×

Contact Us

captcha
×

Inquire

*Name
*Email
Company Name
Tel
*Message