TX7240 loop relay module uses DC24V power supply, through the internal electrical isolation circuit, realize the input bus signal and the output bus signal isolated real-time transmission, output standard bus waveform. The loop relay module can improve the anti-interference ability of the bus, and has the function of extending the communication distance of the bus. The bus signal is mainly used in the field of external interference distortion or need to extend the communication distance of the bus.

• EN54-18:2005 Compliance Built- in MCU processor

• Input bus, the output bus signal between the electrical isolation, electromagnetic interference has a good inhibitory capacity, stable and reliable work Input Fire or Supervisory signal configuration

• LED status indicator

• To correct the bus signal, the output standard bus waveform

• Fast intelligent bus output short circuit judge function, bus output short circuit protection function; after the bus is normal, it can recover the bus output in time

• Aesthetically pleasing design

Compliance : EN54-18:2005

Power Rating

Input Voltage : Loop Power:24VDC [16V to 28V] External PSU: 20 to 28VDC

Current Consumption : Loop: ≤5mA

External PSU: ≤500mA

Bus Input range：≤1000m : Bus Output range：≤1000m 

Most cascade : Three

Module

Protocol : T&A

Indicator Status : Normal: Single Blink/Fault:Steady-On

Material / Colour : Metal /Gray

Dimension / LWH : 155.0 mm x 97.0 mm x40.0 mm

Operating Temperature : -10°C to +50°C

Humidity : 0 to 95% Relative Humidity, Non condensing