Copyright © 2021TANDA Development Pte. Ltd. All rights reserved.Privacy Policy.Site MapDesigned by
Overview
The TX7120 detector is compatible to the TX7004 Analogue Intelligent Fire Alarm Control Panel, produced by single manufacture T&A, to avoid addressable communication compatibility problem.
The TX7120 Intelligent Addressable Optical Smoke & Heat Detector is the ideal device for most applications, due to its spifing linear response to a wide variety of different types of smoke patterns and combining with heat sensing sensor for temperature response.
Secure and speedy communication through the on-board processor enables the detector to make its own decision, resulting in greater automation. In the event of fire, the integral microprocessor analyses the signal according to factors such as signal strength and rate of increase, then confirms these patterns with the pre- programmed fire scenarios, smoke and heat patterns including rate of rise temperature, for a faster and safer response. Once it is confirmed, the LED indicates the sensor status and parallel sending communication signal to the control panel.
Feature and Benefits
• EN54-29 Compliance
• LPCB Pending
• Smoke and Heat Sensor
• Using microprocessor technology with memory capacity up to 10 events
• Analogue sending and digital addressing
• Provide real time algorithm to the control panel
• Smart linear drift compensation
• 360-degree visual indicator
• Onsite Adjustable Parameter
• Removable chamber against dust and small insect
• Ancillary remote indicator output
• Aesthetically pleasing design
Technical Specification
Listed |
LPCB Pending |
Compliance |
EN54-29 |
Input Voltage |
24VDC [16V to 28V] |
Current Consumption Standby 0.6mA, Alarm |
4mA |
Protocol/Addressing | T&A, Value range from 1 to 254 |
Smoke Sensitivity |
As per stipulated standard |
Heat Class Type |
A2R |
Indicator |
Single LED / 360-degree Visual |
Material / Colour |
ABS / White Glossy finishing |
Dimension / Height |
Diameter 99.7 mm / 57 mm |
Weight |
145g (with Base), 90g (without Base) |
Operating Temperature |
-10°C to +50°C |
Humidity |
0 to 95% Relative Humidity, Non condensing |