Communicate with Supplier? Supplier
Ray Guo Mr. Ray Guo
What can I do for you?
Contact Supplier


HomeProductsIntelligent Fire Alarm SystemIntelligent Fire Alarm DetectorConventional Reflective beam detector with mirror
  • Conventional Reflective beam detector with mirror

Conventional Reflective beam detector with mirror

    Payment Type: L/C,T/T
    Incoterm: FOB

Basic Info

Model No.: TX7130

Product Description

Conventional Reflective Beam Detector

TX7130 Conventional Reflective Beam Detector has built in Laser beam pointing and Digital guide display for real user friendly alignment method. The Laser beam pointing accurately point the exact location where to mount mirror and with additional digital guide display allows to monitor and guide on the actual light intensity between the mirror and detector which cannot be seen by our naked eye making it more easy and convenient in alignment commissioning.

The TX7130 has four adjustable operational ranges of between 8 to 20, 20 to 40, 40 to 70 and 70 to 100 meters beside with three adjustable sensitivity setting ranges from 2.6dB, 3.8dB and 5.8dB to meet the specific environmental requirement. The TX7130 works on the principle of reflective infrared beam obscuration. Used in conjunction with a reflector, it will notify the Fire Alarm Panel when the infrared beam is obscured by smoke.

Feature and Benefits

  • EN54-12 Compliance
  • Hassle free alignment, built with digital guide display and laser beam pointing
  • Employ single-ended design through reflective mirror
  • Four ranges wide monitoring from 8-100 meters via encoder
  • Three users programing sensitivity adjustment
  • Built-in microprocessor
  • Self-diagnosis function can monitor for internal faults
  • Automatic compensation for factors weakening received signals, such as dust contamination, positional movement and ageing of the transmitter
  • Fire and Fault interfacing relays
  • Attractive and pleasing appearance
  • Real User friendly alignment method

Technical Specification

Part Number TX7130
  • Listed LPCB Certification
  • Compliance EN 54-12:2002
  • Fire Detection and Alarm Systems BS 5839 Part 1:2002
  • Operating Voltage 20 V to 28 V DC
  • Current Parameters Standby: 23mA Commission: 56mA Alarm: 33mA
  • Beam Sensor Sensitivity [via Encoder] Level 1: 2.6 dB High Sensitivity
Level 2: 3.8 dB Medium Sensitivity
Level 3: 5.8 dB Low Sensitivity
  • Beam Pathway Length [via Encoder] Span 1: 8 to 20 meters Limited Path
Span 2: 20 to 40 meters Short Path
Span 3: 40 to 70 meters Normal Path
Span 4: 70 to 100 meters Long Path
  • Beam Path Angle ±0.4º Directional
  • Alignment Guide Laser Beam Pointer
  • Digital Display Guide Nixie Tube
  • LED Indicator Guide Red: Fire ; Yellow: Fault ; Green: Alignment
  • Reset Time Less than 2 Second
  • Relay Capacity [Fire & Fault] Normally Open & Close/ 2.0 A; 30 VDC
  • Material / Colour ABS / White
  • Dimension / Weight L:190.87 x W:126.87 x H:91.96 mm / 440 gm
  • Weight 0.130 Kg with base
  • Operating Temperature -10°C to +50°C
  • Ingress Protection Rating IP30 [IP66 glue seal-For permanent fixing, Not EN54-12 approved]
  • Humidity 0 to 95% Relative Humidity, Non condensing

Conventional Re Ective Beam Detector

Looking for ideal Beam Detector Edwards Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Beam Detector Advanced are quality guaranteed. We are China Origin Factory of Beam Detector Notify. If you have any question, please feel free to contact us.

Product Categories : Intelligent Fire Alarm System > Intelligent Fire Alarm Detector

Email to this supplier
  • Ray GuoMr. Ray Guo
  • Your message must be between 20-8000 characters



About Us