Communicate with Supplier? Supplier
Ray Guo Mr. Ray Guo
What can I do for you?
Contact Supplier

TANDA

HomeProductsConventional Fire Alarm SystemConventional Manual Call PointNon-Coding Fire Alarm Manual Call Point
  • Non-Coding  Fire Alarm Manual Call Point

Non-Coding Fire Alarm Manual Call Point

    Payment Type: L/C,T/T
    Incoterm: FOB,CFR,CIF,EXW,FCA,CPT,CIP
    Min. Order: 1 Bag/Bags

Basic Info

Model No.:  TXC3150

Usage: Fire

Additional Info

Brand: TNA

Transportation: Ocean,Air

Place of Origin: SHENZHEN

Port: YANTIAN,SHEKOU

Product Description

Conventional Manual Call Point

TXC3150 manual fire alarm button (hereinafter referred to as manual button) has a beautiful structure and wiring is easy and reliable. After fire is manually confirmed, press metal dome on manual button to send alarm signal to the controller. After the controller receives alarm signal, encoded information of manual button and installation position will be displayed and an alarm sounds.


Features and Benefits

  • Hardware circuit is stable and reliable, which is not affected by electromagnetic interference.
  • After metal dome is pressed, a special key shall be used to reset it manually.
  • After metal dome is pressed, manual button provides separate output contact to control other external equipment directly.
  • Plug-type structure is installed easily and reliably.


Technical Specifications
  • Operating voltage: DC24V, 12-28V
  • Operating current:
Normal current: 0mA
Alarm current: ≤30mA
  • Output capacity: rated DC30V/0.1A passive output contact signal and contact resistance ≤100mΩ
  • Type of starting parts: reusable
  • Start type: press metal dome manually
  • Reset type: a special key is used to reset it. After an alarm is sent, open key cover of manual button and insert the key to rotate by 90°to the right.
  • Status indicator: fire alarm indicator, red; in normal state, red indicator is off; but after alarming, it is normally on.
  • Wiring system: two-wire system, without polarity
  • Operating environment: indoors, temperature -20℃~+55℃, relative humidity ≤95%RH, without condensation
  • Housing material and color: ABS, red
  • Weight: about 172g
  • Outline dimension: 95.0mm×95.0mm×46.0mm (with base)
  • Mounting hole pitch: 60mm
  • Conforming standard: EN54-11 Compliance

Conventional Heat Detector

Looking for ideal Non-Coding Manual Call Point Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Manual Call Point Non-Coding are quality guaranteed. We are China Origin Factory of Conventional Emergency Manual Call Point. If you have any question, please feel free to contact us.

Product Categories : Conventional Fire Alarm System > Conventional Manual Call Point

Email to this supplier
  • Ray GuoMr. Ray Guo
  • Your message must be between 20-8000 characters